Tech tip: 3 impression tips that can save you weeks

We recently determined that 3 basic issues are accounting for over 75% of all the bad impressions that we receive. Here are the issues, and how to correct them.

Most frequent impression problems: 1) Double impression, 2) Material not fully set, 3) Posterior distortion, 4) Relining/reinserting, 5) Tray too small, 6) No light body, 7) Not enough material, 8) Missing opposing impression, 9) Material lifter off of tray

Issue #1: Double impression in 2-step material

The most common problem that we find is a double impression, which usually happens during a 2-step impression.

The easiest solution is to switch to a simpler, more reliable 1-step impression material, such as Sultan Genie VPS. We've prepared a video and a printed guide for this type of material.

If you prefer the 2-step impression process, that's okay too. Just keep an eye out for double impressions. Remember to cover the putty with a plastic sheet when you take the first impression, and to take your second impression before the first one has fully set. We have a video and printed guide for this type of impression as well.

Issue #2: Material not fully set

Our second-most common issue is material that hasn't fully set before being removed. There are two simple things you can do to prevent this problem:

  1. Set a timer and make sure to follow the directions for your material exactly.
  2. Discard the first 1 inch of material that comes out of every new mixing tip.

Issue #3: Posterior distortion

The final big issue is distortion of the most distal teeth in the impression. It can be hard to see back there, and sometimes the posterior teeth get shortchanged. There are a couple of ways to avoid this problem:

  1. Make sure that you're using a correctly-sized tray. It should extend past the last tooth in the arch without touching the gums.
  2. Before inserting the tray containing light body, add some light body directly to the occlusal and distal portion of the last tooth in the arch, ensuring that the last tooth is completely covered with material.

We hope this helps. Look for these issues before you send your impressions in, and you could save yourself & your patient the hassle of taking new impressions.

blog comments powered by Disqus