Today's tip comes from Dr. Mark Bentele:
One tip that I have is on placing the engagers. The engager template may not fit passively over the entire tooth if the teeth are not tracking fully. In that situation, the engager may not end up in the right place when you use the entire template. Instead, trim the template down to just the tooth with the engager and about 2/3 of the teeth on either side of it. The template will fit fully in place and the engager will be bonded correctly. This is also helpful because the engager template can be peeled away from the tooth facially rather than trying to pull it off vertically, which is more difficult.
Sounds like a good idea to us. Thanks, Dr. Bentele.
If you have any tips you'd like to share, email us or let us know in the comments.